Mil Furniture
 |
| No items matching your keywords were found. |
Mil Furniture
Long Island Painters Share Some Tips
When estimating the amount of paint they need for the job, Long Island Painters measure the square footage of the area they're going to paint, then divide that number by the coverage area listed on the side of the paint can they're using. Knowing that W=width, L=Length and H=Height, they use this formula: 2 x ( W + L ) x H + ( W x L )
Here's an example of this equation in action using a room measuring 9' x 12' with an 8' high ceiling. The formula with the correct numbers plugged in would be: 2 x ( 9 + 12 ) x 8 + ( 9 x 12 )
Next, Long Island Painters use this formula to measure out the closet space. Once you have this figure, add it to the total of the room space, and you come up with 444 square feet. Then we divide this number by the coverage area printed on the side of the can. The side of this paint can says it covers 400 feet per gallon, so that means we need about one gallon of paint for each coat of paint we plan on applying. We always count on applying at least 2 coats, so we'll need 2 gallons of paint for this job. It's completely normal to have more paint than you need, in fact, Long Island Painters recommend having a little left over to fix missed spots.
Do We Use Latex or Oil?
First, we need to know what type of paint is already on the wall by rubbing the wall with a cloth dipped in rubbing alcohol. A latex based paint will dissolve quickly which means we can repaint with oil or another latex based paint. An oil based paint will not dissolve, so we'll need to use an oil based paint to repaint, or use a coat of conversion paint, then use latex on top of that.
How We Get Water Stains on Textured Ceilings.
Try putting bleach into a spray bottle, and give the stained area a light spray. Check the stain after letting it dry over night, and you might see a little improvement. If so, give it another light spray. This often takes water stains out.
What Tools to Use?
When using brushes with oil based paints we use china bristle, and when using latex paints, we use nylon or nylon/polyester brush. We find that nylon/polyester brushes last longer than straight nylon, and this combination will give us a better finish. We only use the highest quality and the most expensive brushes, because we do not want the bristles falling out while we're painting.
The surface being painted will dictate what size of brush you will need. Brushes generally come in sizes of 1" to 4," available in increments of half an inch. Smaller brushes are ideal for trim, windows, doors, and shutters, while a large 4" brush would be ideal for exterior siding. We recommend that if there is a paint product that has recommendations that make it difficult to clean up (instructions on side of can,) a cheap brush might be an option. It can be thrown away when the job is finished.
As far as paint sleeves go, they are available in many different size naps. They can range from 5 mm to as high as much as 40 mm. Generally, the smoother or glossier the surface you are painting, the smaller the nap. A 5 or 10 millimeter nap is recommended for doors while a 15 or 20 mil nap may be better if you are painting interior walls. For outside surfaces, a thicker nap would be advisable.
We also use tools to prepare surfaces for painting like scrapers, wire brushes, putty knives, sanding blocks, caulking guns, roller trays and a brush combs. We also use plastic to cover your furniture and drop-sheets to protect your floors and stairs.
If you have any questions, feel free to drop us a line: 877-805-5553, or email info@precisionpaintingplus.com
PrecisionPaintingPlus is a New York based painting company specializing in high-end residential painting.
About the Author
It's completely normal to have more paint than you need, in fact, Long Island Painters recommend having a little left over to fix missed spots. Long Island Painters recommend having a little left over to fix missed spots. For more information visit us at: http://precisionpaintingplus.net/Long-Island-Painters-NY.html
How to reinforce furniture?
My MIL is a rather large women and so far she has broken our couch, bed, and chair. How can I reinforce our furniture so it can hold her weight? Please no rude comments. Thank You!
It would depend on the individual piece being reinforced. If it were the legs and back of a chair or couch that were breaking then you just need furniture that is more sturdy, there really isn't a way to reinforce them without changing the way they look with cross braces and such. If it's just the webbing under a cushion you can have heavier duty webbing installed or even a plate of sturdy plywood.
For beds, especially the larger sizes with the angle metal frame under them, you probably need a better frame. The "free" ones they give you when you buy the bed are notoriously weak. A good box structure, with a couple of cross braces for larger beds, made from 3/4 inch ply is the best choice.
You can check your local woodworking store or the web for furniture making books that will give you some ideas
TWO DRUNK GUYS TRY TO ASSEMBLE IKEA FURNITURE - Dead Drunk but Trying [Ep. 01]
Tags: blog, blogs, design, furniture, inspiration